Drivetrain Clean, Wheels, Brakes, Gears, Bearings.
Local Regina Area Only
Frame: Clean and inspect for fatigue damage.
Wheels: Adjust front and rear bearings, true front and rear wheels both radially and laterally as possible, check/adjust spoke tension as needed.
Drive Train: Remove/replace chain, crankset, gear cluster and derailleurs. Solvent clean and blow dry. Align derailleur hanger. Check and or adjust derailleur limit screws, cable tension, height and angle front and rear.
Lubricate: Up to forty pivot points.
Loctite: Crank bolt, rotor bolts, caliper bolts, loose hardware, and loose rear suspension pivots.
Brakes: Adjust cable tension, adjust brake shoe height, angle, toe-in, and confirm center orientation.
Headset: Check for proper bearing adjustment, adjust as needed.
Bottom Bracket: Check for proper bearing adjustment, adjust as needed.
Tires: Flat repair/installation of front/rear tire. Fill tires to maximum stated air pressure.
General: Check/adjust/tighten; stem, handlebar, seat controls, seatpost, controls and crank arms. Installation of most parts as needed. (fork, bottom bracket, headset installations not included). All accessories installed as needed.
Shop supplies, parts, and taxes are extra.